Seamless Aluminum Oval Ferrules

Seamless Aluminum Oval Ferrules

Aluminum Ferrules

Seamless Aluminum Oval Ferrules

The Seamless aluminium ferrules, type oval correspond to the European standard (FSET) for turnback ferrule or ferrule secured eye termination. This standard is EN 13411-3. The ferrules are produced from seamfree extrusions which are extruded seamless over mandrel and the aluminium alloy should be AW-5051A according to EN 573-3. Our ferrules size from 1mm to 102mm all suit for this Requirement. The size below 3mm and above 60mm can be customized according to your requirement.

Seamless oval aluminium ferrules are used in the lifting market commonly , they have a vast variety of applications especially in the lifting gear industry. The oval ferrule are thoroughly specified and very well defined for many different wire rope applications. Four different cases are tested and verified according to the standard, EN 13411-3.

The ferrules applies to bright or galvanized single layer steel wire ropes with round strands and rope grade1570-1960. Wire ropes shall conform to EN12385-4 and 5. The types of rope shall be Ordinary or Lang lay.

Ferrules, when properly applied, are capable of holding the rated breaking strength of the rope to which they are applied. However, to determine the exact holding strength, PULL TESTING IS ESSENTIAL prior to use. This step insures the proper selection of materials, the correct swaging procedure, and an ample margin of safety for the intended use.

Product Name

Seamless Aluminum Oval Ferrule

Standard

EN 13411-3 (DIN3093)

Brand

Klifting

Material

5051A Aluminum Alloy or 5051, 5052

Technology

Extrusion

Size

1mm-152mm

EN 13411-3 Seamless Aluminum Oval Ferrule

Part No

Ferrule Size (mm)

A (mm)

B (mm)

S (mm)

L (mm)

KDA110010

1

1.2

2.4

0.65

5

KDA110015

1.5

1.7

3.4

0.75

6

KDA110020

2

2.2

4.4

0.85

7

KDA110025

2.5

2.7

5.4

1.05

9

KDA110030

3

3.3

6.6

1.25

11

KDA110035

3.5

3.8

7.6

1.5

13

KDA110040

4

4.4

8.8

1.7

14

KDA110045

4.5

4.9

9.8

1.9

16

KDA110050

5

5.5

11

2.1

18

KDA110060

6

6.6

13.2

2.5

21

KDA110065

6.5

7.2

14.4

2.7

23

KDA110070

7

7.8

15.6

2.9

25

KDA110080

8

8.8

17.6

3.3

28

KDA110090

9

9.9

19.8

3.7

32

KDA110100

10

10.9

21.8

4.1

35

KDA110110

11

12.1

24.2

4.5

39

KDA110120

12

13.2

26.4

4.9

42

KDA110130

13

14.2

28.4

5.4

46

KDA110140

14

15.3

30.6

5.8

49

KDA110160

16

17.5

35

6.7

56

KDA110180

18

19.6

39.2

7.6

63

KDA110200

20

21.7

43.4

8.4

70

KDA110220

22

24.3

48.6

9.2

77

KDA110240

24

26.4

52.8

10

84

KDA110260

26

28.5

57

10.9

91

KDA110280

28

31

62

11.7

98

KDA110300

30

33.1

66.2

12.5

105

KDA110320

32

35.2

70.4

13.4

112

KDA110340

34

37.8

75.6

14.2

119

KDA110360

36

39.8

79.6

15

126

KDA110380

38

41.9

83.8

15.8

133

KDA110400

40

44

88

16.6

140

KDA110420

42

46.2

92.4

17.5

147

KDA110440

44

48.4

96.8

18.3

154

KDA110460

46

50.6

101.2

19.2

161

KDA110480

48

52.8

105.6

20

168

KDA110500

50

55

110

20.8

175

KDA110520

52

57.2

114.4

21.6

182

KDA110540

54

59.4

118.8

22.5

189

KDA110560

56

61.6

123.2

23.3

196

KDA110580

58

63.8

127.6

24.2

203

KDA110600

60

66

132

25

210

Part No

Ferrule Size (mm)

A (mm)

B (mm)

S1 (mm)

S2(mm)

L (mm)

KDA110620

62

66.5

133

25

21.7

216

KDA110640

64

68.5

137

27

23.0

224

KDA110660

66

70.5

141

27.9

23.7

230

KDA110680

68

72.5

145

28.1

24.4

237

KDA110700

70

74.5

149

28.8

25.1

244

KDA110740

74

78.5

157

30.4

26.5

260

KDA110780

78

83

166

32

28

270

KDA110840

84

89.4

178.8

34.5

30.2

294

KDA110900

90

95.8

191.6

36.9

32.3

315

KDA110960

96

102.2

204.4

39.4

34.5

336

KDA111020

102

108.6

217.2

41.9

36.6

357

 
The size below 3mm and above 60mm can be customized according to your requirement.

 

COPYRIGHT (C) 2016 KLIFTING ALL RIGHT RESERVED.