Flemish eye sleeves

Flemish eye sleeves

Carbon Steel Ferrules

Flemish eye sleeves

We are the leading manufacturer of Flemish Eye swaging sleeves in China. All our Flemish Eye sleeves have corrosion protection and are made according to the highest quality standards. Surface treatment could be black oxidized or galvanized. Sleeves are stamped for traceability with code, size, and batch number.

All our Flemish Eye swaging sleeves are tested for better swageability. Testing includes hardness test, chemical analysis, microstructure analysis and closed flattening test according to EN 13411-3:2004 standard.
 
The Flemish Eye sleeves satisfy the European standards, EN 13411-3, for mechanical splicing.
 
Sleeves are recommended for use with 6x19, or 6x37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope.
 
Not applicable on rotation resistant wire ropes. When properly applied, the terminations have an efficiency rating of more than 90% according to EN 13411-3, based on the catalogue strength of wire rope.
 
NOTE! Before using our Flemish Eye sleeves with any other type lay, construction or grade of wire rope, it is recommended that the termination to be destructive tested to prove the adequacy of the assembly to be manufactured.

   

Flemish eye sleeves

Part No.  Ferrule Code 

 The size of 

rope(inch) 

Size(inch)

Size after 

 swage(inch) 

Weight 

 kg/100pcs 

A B D E C
 KFS11060  6 1/4” 1 0.66 0.31 0.28 0.47 0.57 2.27
KFS11080 8 5/16” 1.5 0.91 0.38 0.44 0.62 0.75 6.36
KFS11100 10 3/8” 1.5 0.91 0.47 0.39 0.66 0.75 6.36
KFS11110 11 7/16” 2 1.22 0.53 0.65 0.85 1.01 15
KFS11130 13 1/2” 2 1.22 0.63 0.56 0.91 1.01 13
KFS11140 14 9/16” 2.75 1.47 0.7 0.63 1.03 1.24 29
KFS11160 16 5/8” 2.75 1.47 0.75 0.63 1.09 1.24 26
KFS11190 19 3/4” 3.19 1.72 0.91 0.84 1.28 1.46 40
KFS11220 22 7/8” 3.56 2.03 1.03 1 1.53 1.68 60
KFS11260 26 1” 4 2.28 1.16 1.13 1.72 1.93 89
KFS11280 28 1-1/8” 4.8 2.5 1.28 1.25 1.94 2.13 118
KFS11320 32 1-1/4” 5.19 2.78 1.44 1.41 2.16 2.32 161
KFS11350 35 1-3/8” 5.81 3 1.56 1.56 2.38 2.52 192
KFS11380 38 1-1/2” 6.25 3.25 1.69 1.69 2.63 2.71 227
KFS11450 45 1-3/4” 7.25 3.84 1.94 1.97 3.13 3.1 366
KFS11500 50 2” 8.5 4.38 2.25 2.25 3.63 3.56 514
KFS11570 57 2-1/4” 9.56 5.03 2.5 2.53 4.03 4.12 879
KFS11640 64 2-1/2” 10.5 5.5 2.75 2.81 4.5 4.5 1068
KFS11700 70 2-3/4” 11.5 5.75 3 3.09 4.75 4.7 1271
KFS11760 76 3” 12 6 3.25 3.38 5 4.96 1335
KFS11820 82 3-1/4” 13 6.5 3.86 3.54 5.43 5.37 1650
KFS11890 89 3-1/2” 14 7 3.88 3.94 5.84 5.77 2106
KFS11950 95 3-3/4” 15 7.5 4.06 4.25 6.31 6.23 2497
KFS11100 100 4” 16 8.13 4.38 4.5 6.81 6.69 3087
KFS11115 115 4-1/2” 18 9.13 4.88 5.06 7.66 7.45 4540
KFS11130 130 5” 20 10.52 5.5 5.63 8.73 8.28 6600
KFS11150 150 6” 24 12.54 6.5 6.75 10.2 9.93 12300

COPYRIGHT (C) 2016 KLIFTING ALL RIGHT RESERVED.